MAXR 100 Product Overview

MaxR - Energy Efficient Technologies

Trans Bio Energy had developed it’s own proprietary approach to resolving the problem of eroding efficiency in the form of its MaxR line of products. But the industry had developed a cautious attitude towards oil additives as a whole. Before the MaxR technology could be released, Trans Bio Energy had to be sure that they were not about to repeat the problems experienced by its predecessors. As a result, the company consciously committed itself to invest the time and research dollars necessary to ensure the performance of its product.

MaxR – 100 is designed as a concentrated metal conditioner and surface modifier for air conditioning, refrigeration, chiller and heat pump applications. Where competitive products produce only a surface film or coating, MaxR’s proprietary technology utilizes a “molecular bonding technology” to form an electrochemical bond with the systems metal surfaces.

Technically classified as a Molecular Bonding Polarized Refrigerant Oil Additive (PROA), MaxR products are not intended to “treat” the equipment’s primary lubricant, but uses it only as a carrier/transport medium to distribute the MaxR throughout the equipment to treat the systems metal surfaces and return the displaced debris back to the lubricant filtration system. MaxR – 100 contains an activated polar molecule that has been highly polarized and charged (negatively) at one end. Each charged molecule has an affinity for metal and, as the system continues to circulate, the polarized molecule displaces the build-up of refrigerant oil in the condenser and evaporator coils and electrochemically bonds with metal surfaces. Ultimately the MaxR 100 forms a microscopic, protective lubricant layer that is one molecule thick that physically bonds to become a part of the equipment’s metal surface.

The two most important benefits of the MaxR treatment are:
• improved heat transfer of the evaporator and condensing coils; and
• increased lubricity of the refrigerant oil.

1. Regains lost efficiency of the heat exchange system in HVAC refrigeration units.

Energy savings for each treated system will vary according to age, compressor type, size, maintenance history, and loading. Customers with systems five years old or greater will experience the most immediate benefit from the treatment. MaxR displaces dirt, carbon deposits, and oil build up as it eliminates the insulation barrier that has built up in the evaporator coils, returning the equipment to near factory efficiency. Although newer systems experience a smaller increase in efficiency, MaxR will provide the protection required to prevent build-up on the heat exchangers in the first place.

It is extremely important to note that MaxR – 100 does not include chemical elements of the Halogen group, particularly chlorine and fluorine, sulfur or phosphorous, which may combine with hydrogen and form highly corrosive acids as experienced by customers who have used competitive products.

MaxR does not contain PTFE (Teflon) or any other particulate that could cause corrosion or change mechanical tolerance in an air conditioning or refrigeration system.

2. Prolongs the life of mechanical equipment.

MaxR 100 contains a PROA element that increases the lubricity of refrigerant oil by 1400% thereby significantly reducing mechanical coefficient of friction between the parts resulting in reduced wear, tear, and maintenance on the equipment. Independent lubricity testing reports that untreated refrigerant oil samples failed under pressures of 300 psi. Samples tested with MaxR – 100 did not even fail at the tests maximum pressure of 4,500 psi, representing a 1,400% increase in lubricity.

Unlike so many of the products available MaxR does not operate as an “Oil Additive” treatment and does not blend into the existing refrigerant. MaxR products are not intended to “treat” or “modify” the equipments primary lubricant. MaxR products utilize the primary lubricant only as a carrier medium to distribute the MaxR treatment throughout the equipment to treat the metal surfaces and return debris back to the filtration system.

MaxR products form a microscopic protective “lubricant layer” that physically becomes part of the equipment’s metal surface, providing continuous lubrication protection. This electrochemically bonded lubricant layer can provide protection even during a catastrophic loss of primary lubricant.

Trans Bio Energy is confident in their products performance capabilities and backs it performance up with a warranty and product liability insurance to support its customers.